Home > Kolesa in mopedi > Kolesarske tlačilke > Crivit Kolesarske tlačilke > Crivit IAN 64302 Kolesarska tlačilka

Priročnik Crivit IAN 64302 Kolesarska tlačilka

Potrebujete priročnik za vaš Crivit IAN 64302 Kolesarska tlačilka? Spodaj si lahko brezplačno ogledate in prenesete PDF priročnik v slovenščini. Ta izdelek ima trenutno 1 pogosto zastavljeno vprašanje, 0 komentarjev in ima 0 glasov. Če to ni priročnik, ki ga želite, nas kontaktirajte.

Ali je vaš izdelek okvarjen in v priročniku ne najdete rešitve? Obiščite Repair Café za brezplačno popravilo.

Priročnik

Standing Air Pump Dated: 01.03.2011

Instruction Manual

Congratulations on your purchase of this high-quality standing air pump. For safety reasons

we request that you read through the instruction manual and the safety notes it contains as

carefully as possible and to save this, as it can always be helpful if you encounter any problems

with your air pump. The instruction manual is a set component of this product and must be

included if the product is passed on to any third party.

Intended use:

This standing air pump is suitable for inﬂ ating all conventional bicycle tyres. Other uses or mo-

diﬁ cations to the product are considered non-intended usage and can lead to risk of injury and

damages. The distributor bears no liability for damages resulting from non-intended usage. The

product is not intended for commercial use.

Warnings:

You can inﬂ ate all bicycle tyres up to the pump’s indicated maximum tyre

pressure (max. 8 bar / 116 PSI) or to the tyre manufacturer’s indicated maxi-

mum tyre pressure. This can usually be found on the tyre wall. The indicated

maximum values may not be exceeded at any time. Defective or damaged

air pumps may no longer be used due to risk of injury. Defective standing air

pumps must be properly disposed of. Repairs are not possible.

Due to the high operating force and the risks associated with this, the pro-

duct is not suited for use by children or persons with physical and/or mental

disabilities. Please note that the pump plunger and pump cylinder become

very hot over longer periods of pumping due to the friction between them.

For this reason, you should only grasp the pump on the pump handle after

pumping in order to avoid burns.

Due to the risk of injury, a defective or damaged standing air pump may

never be used.

Package contents:

1 x standing air pump

1 x metal adapter for balls,

2 x plastic adapters for air mattresses, inﬂ atable toys, etc.

Technical data:

Type: Standing air pump

Service Centre Nr: 63785 / IAN Nr. 64302

Nominal pressure: 6 bar / 87 PSI

Nominal excess pressure: 8 bar / 116 PSI

Pressure hose length: 62 cm

Production date: 2011

Warranty: 3 years

Distributor & service address:

Internationales Service Center

Schönbornstr. 14

54295 Trier / Germany

Tel. Nr.: 0049 (0) 651 436 6452

E-Mail: service@internationales-service-center.de

www.internationales-service-center.de

Cleaning & care instructions!

- clean with a damp cloth

- do not immerse in water

- Regularly inspect the standing air pump’s screw joints for secure attachment before use.

Maintenance:

The standing air pump is maintenance-free.

Storage instructions!

Please save the product information! The instruction manual is a set component of this product

and must be included if the product is passed on to any third party.

Disposal:

The packaging is made of 100% environmentally-friendly materials which you can dispose of

via your local recycling points. Please obtain information about the disposal options for the

standing air pump from your community or municipal government.

Operation of the standing air pump:

Place the standing air

pump on a level and

stable surface.

There must be no

kinks in the pump

hose.

During pumping, please

always position yourself

with both feet on the

foot plate of the stan-

ding air pump to ensure

it won’t fall over.

Operate the pump

handle in a smooth

and even manner and

not too quickly.

2 3

Ocena

Povejte nam, kaj menite o Crivit IAN 64302 Kolesarska tlačilka, tako da oddate oceno izdelka. Ali želite deliti svoje izkušnje z izdelkom ali postaviti vprašanje? Oddajte komentar na dnu strani.

Ali ste zadovoljni z Crivit IAN 64302 Kolesarska tlačilka?
Da Ne

Bodite prvi, ki boste ocenili ta izdelek

0 glasovi

Pridružite se pogovoru o tem izdelku

Tukaj lahko delite svoje mnenje o Crivit IAN 64302 Kolesarska tlačilka. Če imate vprašanje, najprej natančno preberite priročnik. Zahtevo za priročnik lahko opravite z uporabo našega kontaktnega obrazca.

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Crivit IAN 64302 Kolesarska tlačilka. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Crivit. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Crivit IAN 64302 Kolesarska tlačilka v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Blagovna znamka	Crivit
Model	IAN 64302
Kategorija	Kolesarske tlačilke
Vrsta datoteke	PDF
Velikost datoteke	5.72 MB

Vsi priročniki za Crivit Kolesarske tlačilke
Več priročnikov za Kolesarske tlačilke

Pogosto zastavljena vprašanja o Crivit IAN 64302 Kolesarska tlačilka

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.