Home > Kolesa in mopedi > Kolesarske tlačilke > Crivit Kolesarske tlačilke > Crivit IAN 68643 Kolesarska tlačilka

Priročnik Crivit IAN 68643 Kolesarska tlačilka

Potrebujete priročnik za vaš Crivit IAN 68643 Kolesarska tlačilka? Spodaj si lahko brezplačno ogledate in prenesete PDF priročnik v slovenščini. Ta izdelek ima trenutno 1 pogosto zastavljeno vprašanje, 0 komentarjev in ima 0 glasov. Če to ni priročnik, ki ga želite, nas kontaktirajte.

Ali je vaš izdelek okvarjen in v priročniku ne najdete rešitve? Obiščite Repair Café za brezplačno popravilo.

Priročnik

Floor Pump

Dated: 01.08.2011

Instruction Manual

Congratulations on your purchase of this high-quality Floor pump. For safety reasons we

request that you read through the instruction manual and the safety notes it contains as

carefully as possible and to save this, as it can always be helpful if you encounter any

problems with your air pump. The instruction manual is a set component of this product

and must be included if the product is passed on to any third party.

Storage instructions!

Please save the product information! The instruction manual is a set component of this

product and must be included if the product is passed on to any third party.

Intended use:

This Floor pump is suitable for inﬂating all conventional bicycle tyres.

Other uses or modiﬁcations to the product are considered non-inten-

ded usage and can lead to risk of injury and damages. The distributor

bears no liability for damages resulting from non-intended usage. The

product is not intended for commercial use.

Warnings:

You can inﬂate all bicycle tyres up to the pump’s indicated maximum

tyre pressure (max. 8 bar / 116 PSI) or to the tyre manufacturer’s indi-

cated maximum tyre pressure. This can usually be found on the tyre

wall. The indicated maximum values may not be exceeded at any time.

Defective or damaged air pumps may no longer be used due to risk of

injury. Defective Floor pumps must be properly disposed of. Repairs are

not possible.

Due to the high operating force and the risks associated with this, the

product is not suited for use by children or persons with physical and/

or mental disabilities. Please note that the pump plunger and pump

cylinder become very hot over longer periods of pumping due to the

friction between them. For this reason, you should only grasp the pump

on the pump handle after pumping in order to avoid burns.

Due to the risk of injury, a defective or damaged Floor pump may never

be used.

Package contents:

1 x ﬂoor pump

1 x metal adapter for balls,

2 x plastic adapters for air mattresses, inﬂatable toys, etc.

Technical data:

Type: Floor Pump

Service Centre Nr: 63785/12 / IAN Nr. 68643

Nominal pressure: 6 bar / 87 PSI

Nominal excess pressure: 8 bar / 116 PSI

Pressure hose length: 64,5 cm

Production date: 2012

Warranty: 3 years

Distributor:

Monz GmbH & Co. KG

Bruchhausenstr. 20 - 54290 Trier / Germany

Service address:

Internationales Service Center

Schönbornstr. 14 - 54295 Trier / Germany

Tel. Nr.: 0049 (0) 651 436 6452

E-Mail: service@internationales-service-center.de

www.internationales-service-center.de

Cleaning & care instructions!

- clean with a damp cloth

- do not immerse in water

- Regularly inspect the ﬂoor pump’s screw joints for secure attachment before use.

Maintenance:

The ﬂoor pump is maintenance-free.

Disposal:

The packaging is made of 100% environmentally-friendly materials which you can dispo-

se of via your local recycling points. Please obtain information about the disposal options

for the ﬂoor pump from your community or municipal government.

Operation of the ﬂoor pump:

Place the ﬂoor pump

on a level and stable

surface.

There must be no

kinks in the pump

hose.

During pumping,

please always position

yourself with both feet

on the foot plate of the

ﬂoor pump to ensure it

won’t fall over.

Operate the pump

handle in a smooth

and even manner

and not too quickly.

2 3

210 mm

148 mm 148 mm

Ocena

Povejte nam, kaj menite o Crivit IAN 68643 Kolesarska tlačilka, tako da oddate oceno izdelka. Ali želite deliti svoje izkušnje z izdelkom ali postaviti vprašanje? Oddajte komentar na dnu strani.

Ali ste zadovoljni z Crivit IAN 68643 Kolesarska tlačilka?
Da Ne

Bodite prvi, ki boste ocenili ta izdelek

0 glasovi

Pridružite se pogovoru o tem izdelku

Tukaj lahko delite svoje mnenje o Crivit IAN 68643 Kolesarska tlačilka. Če imate vprašanje, najprej natančno preberite priročnik. Zahtevo za priročnik lahko opravite z uporabo našega kontaktnega obrazca.

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Crivit IAN 68643 Kolesarska tlačilka. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Crivit. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Crivit IAN 68643 Kolesarska tlačilka v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Blagovna znamka	Crivit
Model	IAN 68643
Kategorija	Kolesarske tlačilke
Vrsta datoteke	PDF
Velikost datoteke	7.45 MB

Vsi priročniki za Crivit Kolesarske tlačilke
Več priročnikov za Kolesarske tlačilke

Pogosto zastavljena vprašanja o Crivit IAN 68643 Kolesarska tlačilka

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.