Priročnik Electrolux E8SI1-6DBM Renew 800 Likalnik

Priročnik

6 www.electrolux.com

ENGLISH

Thank you for choosing an Electrolux product. In order to ensure the best results, always use original Electrolux

accessories and spare parts. They have been designed especially for your product. This product is designed with

the environment in mind. All plastic parts are marked for recycling purposes.

It may be possible that your steam iron does not produce steam immediately after lling it with water. The reason for

this is that air trapped in the inner system can delay this function a few seconds. Please be patient and try it again by

pressing the steam on/o button. For your convenience the steam will be produced after you release the steam on/

o button for a few seconds and it is not necessary to press the button all the time. Find out your rhythm for the best

steaming result.

COMPONENTS

A. Hot soleplate indicator

B. Water spray nozzle

C. Light indicator for heat-up/cool-down

D. Headlight illuminating ironing area

E. Touch screen for temperature-steam programme

selection

F. Reminder for Flush Clean & replacing Soft Water

Activator

G. Steam jet button

H. Spray button

I. Steam on/o button

J. Power cord

K. Flush Clean button

L. Soft Water Activator, replaceable

M. Water tank with max level indicator

N. Cord wrap facility

O. RESILIUM anodized ski-sloped soleplate

P. Water ll & Water Softener System cover

Q. Iron heel

R. Water lling container

Picture page 2-4

GETTING STARTED AND OPERATING INSTRUCTIONS

1 Before rst use. Remove all adhesive remains and gently rub with a dampened cloth. Rinse water tank to

remove foreign particles. Position the steam iron horizontally on the ironing-board or on a heat resistant, secure

surface at the same height as an ironing-board. Unwind and straighten the power cord.

2 Fill the steam iron with water. Make sure, the plug is outside the power outlet. Raise the heel of the iron, open

the lling aperture cover (P). Use the water lling container provided (R), pour water to maximum level (M). Close

the cover (P). This product is appropriate for use with tap water. It is recommended to use Electrolux AquaSense

ltered water resp. a mix of 50% distilled, 50% tap water if the tap water is particularly hard.

Always rell the water tank to MAX level using cold water.

Caution! Never operate the appliance without any water in the tank.

This product is equipped with a detachable Soft Water Activator (L), we recommend to replace when the

reminder

for Flush Clean & replacing Soft Water Activator

(F) is ashing.

Before starting ironing, please test your iron on an old towel to ensure that no residues inside the iron are

transferred to your garments. If necessary, wipe the soleplate with a slightly damp cloth.

3 Connect the steam iron to the mains supply. Select the ironing programme from the touch screen (E) on the

steam iron. The light indicator (C) on the iron will pulsate when preheating. When turned on for the rst time,

temporary vapours/odours may occur. The iron is equipped with an auto-steam function, which automatically

adjusts the steam output to the selected ironing programme supporting best ironing results.

4 As soon as the selected temperature has been reached, the lights indicator (C) is on permanently and the head-

light (D) turns on. Now the iron is ready to be used.

5 To activate the steam function, press and hold the steam on/o button (I) for 3-5 seconds.

6 For extra steam, press the steam jet button for one second.

Iron with extra steam: Press the steam buttons the same time for improved crease removal. When releasing the

buttons, use up the steam before putting the iron back on its heel.

Caution! Never release steam while the iron is standing on its heel.

Dry ironing: When not pressing steam buttons, the iron will be in dry mode.

7 Using

the spray mist. Pre-damp fabrics by pressing the spray button several times to release a ne mist; ensure

the tank is at least half full.

8 Steam hanging items.

The vertical steam function is ideal for curtains and suits. Hold the iron at a distance of

10-20 cm and press the steam jet button.

9 The iron is equipped with 3-way auto-o function. If the iron is left unattended on soleplate or the side, it au-

Ocena

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Electrolux E8SI1-6DBM Renew 800 Likalnik. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Electrolux. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Electrolux E8SI1-6DBM Renew 800 Likalnik v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Vsi priročniki za Electrolux Likalniki
Več priročnikov za Likalniki

Pogosto zastavljena vprašanja o Electrolux E8SI1-6DBM Renew 800 Likalnik

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.

Podobni izdelki

Priročnik

Electrolux EDB5236GR Likalnik

Priročnik

Electrolux EDB1730 Likalnik

Priročnik

Electrolux EDBS3360 Likalnik

Priročnik

Electrolux EDB1675 Likalnik

Priročnik

Electrolux EDB8060 5Safety Likalnik

Priročnik

Electrolux EDBS7146GR Likalnik

Priročnik

Electrolux E8ST1-6DBM Renew 800 Likalnik

Priročnik

Electrolux EDB1720 Likalnik

Sorodne kategorije