Home > Gospodinjski aparati > Likalniki > Emerio Likalniki > Emerio SI-120718.2 Likalnik

Priročnik Emerio SI-120718.2 Likalnik

Potrebujete priročnik za vaš Emerio SI-120718.2 Likalnik? Spodaj si lahko brezplačno ogledate in prenesete PDF priročnik v slovenščini. Ta izdelek ima trenutno 4 pogosto zastavljeni vprašanji, 0 komentarjev in ima 0 glasov. Če to ni priročnik, ki ga želite, nas kontaktirajte.

Ali je vaš izdelek okvarjen in v priročniku ne najdete rešitve? Obiščite Repair Café za brezplačno popravilo.

Priročnik

- 6 -

STEAM IRONING

1. Fill the water tank, as described before initial usage.

2. Steam ironing can be used in the temperature ranges ●●, ●●● MAX. For the reliable functioning of the steam

ironing, the water tank must be at least ¼ filled.

3. Select the setting on the temperature regulator.

4. When the indicator light goes off, the required temperature is reached. The iron is ready for use.

5. Set the steam control knob to position “ ” for steam ironing; steam starts coming out from the holes in

the soleplate while ironing.

6. The iron surface must always be kept in an upright position.

7. To turn off, turn the temperature regulator counter-clockwise to “OFF” and pull out the power plug.

8. Turn the appliance upside down and carefully pour the remaining water out of the water tank. Carefully

shake the appliance.

Notice: With conventional steam ironing, water may leak from the soleplate if a too low temperature has been

selected. If this happens, turn the temperature regulator to the advised position. Steam will recommence as soon

as the appropriate temperature has been reached.

AUTOMATIC ELECTRICITY INTERRUPTION FOR SECURITY

In case the installed thermostat gets out of order, the appliance will be automatically cut off to avoid the

overheating. If this happens, send the appliance for repair.

SELF-CLEAN FUNCTION

According to frequency of use it is recommended that you should monthly clean the steam iron - this will increase

the steam iron’s life span.

If the water is very hard in your area, use the self-clean function every two weeks.

1. Make sure the appliance is unplugged.

2. Fill the water tank to maximum level.

3. Select the maximum ironing temperature.

4. Put the plug in the wall socket.

5. Unplug the iron when the temperature indicator light goes off.

6. Hold the iron over the sink, turn and hold the steam control knob to position “self-clean”, and gently shake

the iron to and fro. (Steam and boiling water will come out of the soleplate. Impurities and flakes (if any) will

be flushed out).

7. Repeat the self-clean process if the iron still contains a lot of impurities.

CLEANING

⚫ Before cleaning the iron ensure it is disconnected from the power supply and has completely cooled down.

⚫ Deposits on the soleplate may be removed with a rough cloth soaked in a vinegar water solution.

⚫ The casting may be wiped with a damp cloth and then polished with a dry one.

⚫ Do not use abrasives on the soleplate.

⚫ Keep the soleplate smooth. Avoid hard contact with metal objects.

TIPS

Which type of water to use?

Your appliance has been designed to function with untreated tap water. If your water is very hard, it’s possible to

mix untreated tap water with storebought distilled or demineralised water in the following proportion: 50% tap

water / 50% distilled water.

Which type of water not to use?

The types of water listed below contain organic waste or mineral elements that can cause spitting, brown staining,

or leakage: water from clothes dryers, scented or softened water, water from air conditioners.

Ocena

Povejte nam, kaj menite o Emerio SI-120718.2 Likalnik, tako da oddate oceno izdelka. Ali želite deliti svoje izkušnje z izdelkom ali postaviti vprašanje? Oddajte komentar na dnu strani.

Ali ste zadovoljni z Emerio SI-120718.2 Likalnik?
Da Ne

Bodite prvi, ki boste ocenili ta izdelek

0 glasovi

Pridružite se pogovoru o tem izdelku

Tukaj lahko delite svoje mnenje o Emerio SI-120718.2 Likalnik. Če imate vprašanje, najprej natančno preberite priročnik. Zahtevo za priročnik lahko opravite z uporabo našega kontaktnega obrazca.

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Emerio SI-120718.2 Likalnik. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Emerio. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Emerio SI-120718.2 Likalnik v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Blagovna znamka	Emerio
Model	SI-120718.2
Kategorija	Likalniki
Vrsta datoteke	PDF
Velikost datoteke	1.48 MB

Vsi priročniki za Emerio Likalniki
Več priročnikov za Likalniki

Pogosto zastavljena vprašanja o Emerio SI-120718.2 Likalnik

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.

Ali lahko dno likalnika očistim s čistilnikom? Potrjeno

Ne, to lahko poškoduje dno. Za čiščenje uporabite vlažno krpo ali mehko gobo.

To je bilo koristno (365) Preberi več

Kakšne so razlike med parnim likalnikom in običajnim likalnikom? Potrjeno

Največja prednost parnega likalnika je, da zaradi uporabe pare lažje odstranjuje gube. Običajno likalnik je nasprotno veliko lažji in pogosto cenejši.

To je bilo koristno (298) Preberi več