Priročnik FERM TDM1003 Vrtalna stiskalnica

Priročnik

62 Ferm

BENCH PILLAR DRILL

THE NUMBERS IN THE FOLLOWING TEXT

CORRESPOND WITH THE PICTURES AT PAGE 2

Caution! For your own safety, carefully read these

instructions for use before using the machine.

CONTENTS:

1. Machine information

2. Safety instructions

3. Assembly

4. Operation, hints and tips

5. Maintenance

1. MACHINE INFORMATION

TECHNICAL SPECIFICATIONS

PRODUCT INFORMATION

Fig.A

1. On/off switch

2. Drill depth gauge

3. Protection guard

4. Motor

5. Drill depth lever

6. Table adjustment

Check first whether or not the delivery has been

damaged by transport and/or whether all the parts are

present.

2. SAFETY INSTRUCTIONS

The following pictograms are used in these instructions

for use:

CE Conforms to the applicable European safety

standards

Danger of bodily injury or material damage.

Indicates electrical shock hazard.

Read the instructions

Wear eye and ear protectors

Faulty and/or discarded electrical or electronic

apparatus have to be collected at the appropriate

recycling locations.

Carefully read this manual before using the machine.

Make sure that you know how the machine functions and

how to operate it. Maintain the machine in accordance

with the instructions to make sure it functions properly.

Keep this manual and the enclosed documentation with

the machine.

When using electric machines always observe the

safety regulations applicable in your country to

reduce the risk of fire, electric shock and personal

injury. Read the following safety instructions and

also the enclosed safety instructions. Keep these

instructions in a safe place!

Before using the machine the guidelines must be taken

into consideration. Every mechanical or electrical

alteration to the machine which does not meet the

applicable guidelines carries a considerable accident risk.

DURING USE THE FOLLOWING POINTS

MUST BE CONSIDERED:

• Do not remove any mechanical or electrical

protective provisions.

• Check whether all the protective provisions are in

place and have been attached correctly.

• Wear safety goggles during drilling.

• If you have long hair, be sure to wear hair protection

(hair net or cap). Long hair can easily be caught in

moving parts.

• Wear fitted clothing; tie buttons on sleeves.

• Do not hold any workpieces in your hands when

drilling. Always use a machine clamp or another

clamping tool.

• Protect workpieces and clamping tools on the bench

to prevent them from getting caught. Fasten them

yourself with screws or clamp them to a machine

clamp fastened to the table.

• Check whether the drill holder is tightened properly.

• Check whether cable lead-throughs are okay.

• To remove drill chips only use hand brushes,

brushes, rubber wipers, chip hooks or similar aids.

• Do not carry out any cleaning or greasing work while

the machine is in operation.

• Always keep V-belts covered (so that your hands

cannot become caught).

• Only tighten the toothed ring drill holder by means

of the wrench.

• Never leave the wrench of the drill holder in the drill

holder! Before switching on the machine, check

whether the wrench really has been removed!

• Do not use any drills which are damaged on the shank.

• Drill is not suitable to use as press!

• If the mains cable is damaged, it may only be replaced

by a mains cable of the same type.

Voltage | 230 V

Frequency | 50 Hz

Power input | 450 W

No load speed | 390-2340/min

Number of speeds | 9 (L)

Chuck capacity/Morse Conical | 1.5-16 mm / B-16

Weight | 21 kg

Lpa (sound pressure level) | 62.0 dB(A)

Lwa (sound power level) | 75.0 dB(A)

Vibration value | 1.561 m/s

2

Ferm 3

SPARE PARTS LIST FTB-16/450

REF NR DESCRIPTION FERM NR

311111 CHUCK 16MM - B16 001

800195 2XV-BELT 10X478 014

309203 MICRO SWITCH 020

309200 MOTOR 230V 500 WATT 025

311105 SWITCH 039

311059 SPRING HOLDER 043

311058 SPRING 044

311016 HANDLE + GLOBE 049 + 050

311055 EYESHIELD 060

309387 CHUCK KEY -

301064 OPERATIONPIN MICRO SWITCH -

Ocena

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš FERM TDM1003 Vrtalna stiskalnica. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate FERM. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš FERM TDM1003 Vrtalna stiskalnica v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Vsi priročniki za FERM Vrtalne stiskalnice
Več priročnikov za Vrtalne stiskalnice

Pogosto zastavljena vprašanja o FERM TDM1003 Vrtalna stiskalnica

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.

Podobni izdelki

Priročnik

FERM TDM1008 Vrtalna stiskalnica

Priročnik

FERM TDM1026 Vrtalna stiskalnica

Priročnik

FERM TDM1027 Vrtalna stiskalnica

Priročnik

Güde GTB 16 LASER/550 W Vrtalna stiskalnica

Priročnik

Parkside IAN 102855 Vrtalna stiskalnica

Priročnik

Einhell TC-BD 500 Vrtalna stiskalnica

Priročnik

Far Tools P 22F Vrtalna stiskalnica

Priročnik

Far Tools DPB 16E Vrtalna stiskalnica

Sorodne kategorije