English (original instructions)
EN
DE ES IT FR PT NL RU FI SV NO DA PL CS SK SV HR HU RO BG EL AR TR HE LT LV ET
STORING THE TRIMMER
Remove the battery pack from the trimmer before
storing.
Store it in a place that is inaccessible to children.
Keep away from corrosive agents such as garden
chemicals and de-icing salts.
Store and charge your batteries in a cool area.
Temperatures above or below normal room
temperature will shorten battery pack life.
Store the battery pack where the temperature is below
27˚C and away from moisture.
All batteries gradually lose their charge. The higher the
temperature, the quicker they lose their charge. If you
store your unit for long periods of time without using
it, recharge the batteries every month or two. This
practice will prolong battery pack life.
Secure the trimmer during transport to prevent damage
or injury. Clean and maintenance before storage, use
of guards on cutting attachments with metal blades.
Use of cover for metal blades during transport and
storage.
ENVIRONMENTAL PROTECTION
Environmental protection should be a priority of
considerable importance when using the machine,
for the benefit of both social coexistence and the
environment in which we live. Try not to cause any
disturbance to the surrounding area.
Scrupulously comply with local regulations for the
disposal of packaging, deteriorated parts or any
elements with a strong environmental impact; this
waste must not be disposed of as normal waste, it must
be separated and taken to specified waste disposal
centres where the material will be recycled.
Scrupulously comply with local regulations for the
disposal of waste materials after mowing.
At the time of decommissioning, do not pollute the
environment with the machine, but hand it over to a
disposal centre, in accordance with the local laws in
force.
TROUBLESHOOTING
PROBLEM POSSIBLE CAUSE SOLUTION
String will not advance when using
the auto-feed head.
String is welded to itself. Lubricate with silicone spray.
Not enough string on spool. Install more string. Refer to string
replacement earlier in this manual.
String is worn too short. Pull string while pressing line release
button.
String is tangled on spool. Remove string from spool and rewind.
Refer to string replacement earlier in
this manual.
Grass wraps around shaft housing
and string head.
Cutting tall grass at ground level Cut tall grass from the top down to
prevent wrapping.
Motor fails to start when switch trigger
is depressed.
Battery is not secure. To secure the battery pack, make
sure the latch on bottom of the battery
pack snaps into place.
Battery is not charged. Charge the battery pack according
to the instructions included with your
model.
Shaft not connected completely Make sure lower shaft is fully seated
in shaft coupler on upper shaft and
secure shaft coupler.
Pridružite se pogovoru o tem izdelku
Tukaj lahko delite svoje mnenje o Greenworks G24LT Kosilnica z nitko. Če imate vprašanje, najprej natančno preberite priročnik. Zahtevo za priročnik lahko opravite z uporabo našega kontaktnega obrazca.