Home > Naredi sam > Krožne žage > Hikoki Krožne žage > Hikoki C 5MEY Krožna žaga

Priročnik Hikoki C 5MEY Krožna žaga

Potrebujete priročnik za vaš Hikoki C 5MEY Krožna žaga? Spodaj si lahko brezplačno ogledate in prenesete PDF priročnik v slovenščini. Ta izdelek ima trenutno 3 pogosto zastavljeni vprašanji, 0 komentarjev in ima 0 glasov. Če to ni priročnik, ki ga želite, nas kontaktirajte.

Ali je vaš izdelek okvarjen in v priročniku ne najdete rešitve? Obiščite Repair Café za brezplačno popravilo.

Priročnik

English

MAINTENANCE AND INSPECTION

1. Inspecting the saw blade

Since use of as dull saw blade will degrade eﬃ ciency

and cause possible motor malfunction, sharpen or

replace the saw blade as soon as abrasion is noted.

2. Inspecting the mounting screws

Regularly inspect all mounting screws and ensure that

they are properly tightened. Should any of the screws be

loose, retighten them immediately. Failure to do so could

result in serious hazard.

3. Replacing supply cord

If the replacement of the supply cord is necessary, this

has to be done by the manufacturer of this agent in order

to avoid a safety hazard.

4. Motor unit maintenance

The motor winding is an important part of this tool. Avoid

damaging and be careful to avoid contact with cleaning

oil or water.

After 50 hours of use, clean the motor by blowing into the

ventilation holes of the motor housing with dry air from an

air gun or other tool (Fig. 29).

Dust or particle accumulation in the motor can result in

damage.

5. Inspecting and maintaining the lower guard

Always make sure that the lower guard moves smoothly.

In the event of any malfunction, immediately repair the

lower guard.

For cleaning and maintenance, use an air gun or other

tool to blow clean the space between the lower guard

and gear cover as well as the rotation part of the lower

guard with dry air (Fig. 29).

Doing so is eﬀ ective for the emission of chips or other

particles.

Accumulation of chips or other particles around the lower

guard may result in malfunction or damage.

WARNING

To prevent dust inhalation or eye irritation, wear

protective safety goggles and a dust mask when

using an air gun or other tool to clean the lower guard,

ventilation holes or other parts of the product.

Ensure smooth movement

of lower guard

Rotation part of

the lower guard

Housing vent

Space between

lower guard

and gear cover

Air gun

Fig. 29

6. Cleaning the inside of the saw cover

Regularly check and clean to make sure that sawdust

and other residue do not collect inside of the saw cover.

Always remove the saw blade when checking and

cleaning.

Washer (A)

Spindle

Saw cover

Fig. 30

7. Cleaning on the outside

When the power tool is stained, wipe with a soft dry cloth

or a cloth moistened with soapy water. Do not use chloric

solvents, gasoline or paint thinner, for they melt plastics.

8. Storage

Please avoid locations such as the following for the

storage of products and accessories that are not being

used, and store them in a safe and dry place.

NOTE

○ Do not store them in locations where children can

reach them or easily get hold of them.

○ Do not store them in locations where rain can fall

such as under the eaves of a house, or where there

is humidity.

○ Do not store them in locations where there are

sudden changes in humidity or there is direct

sunlight.

○ Do not store them in locations where there are

volatile substances which have a risk of catching ﬁ re

or exploding.

CAUTION

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

GUARANTEE

We guarantee HiKOKI Power Tools in accordance with

statutory/country speciﬁ c regulation. This guarantee does

not cover defects or damage due to misuse, abuse, or

normal wear and tear. In case of complaint, please send

the Power Tool, undismantled, with the GUARANTEE

CERTIFICATE found at the end of this Handling instruction,

to a HiKOKI Authorized Service Center.

0000Book̲C5MEY.indb70000Book̲C5MEY.indb7 2019/02/2716:32:282019/02/2716:32:28

Ocena

Povejte nam, kaj menite o Hikoki C 5MEY Krožna žaga, tako da oddate oceno izdelka. Ali želite deliti svoje izkušnje z izdelkom ali postaviti vprašanje? Oddajte komentar na dnu strani.

Ali ste zadovoljni z Hikoki C 5MEY Krožna žaga?
Da Ne

Bodite prvi, ki boste ocenili ta izdelek

0 glasovi

Pridružite se pogovoru o tem izdelku

Tukaj lahko delite svoje mnenje o Hikoki C 5MEY Krožna žaga. Če imate vprašanje, najprej natančno preberite priročnik. Zahtevo za priročnik lahko opravite z uporabo našega kontaktnega obrazca.

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Hikoki C 5MEY Krožna žaga. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Hikoki. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Hikoki C 5MEY Krožna žaga v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Blagovna znamka	Hikoki
Model	C 5MEY
Kategorija	Krožne žage
Vrsta datoteke	PDF
Velikost datoteke	15.16 MB

Vsi priročniki za Hikoki Krožne žage
Več priročnikov za Krožne žage

Pogosto zastavljena vprašanja o Hikoki C 5MEY Krožna žaga

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.

Koliko milimetrov mora žaga štrleti pod materialom, ki ga žagam? Potrjeno

Najbolje je, da ta ostane 3 mm ali več. Ko je manj, obstaja možnost, da se material sesuje ali povzroči grd rezultat.

To je bilo koristno (95) Preberi več

Ali moram pri uporabi krožne žage nositi zaščito za sluh? Potrjeno

Ja, moral bi. Čeprav se količina hrupa, ki ga proizvaja krožna žaga, med različnimi znamkami in modeli razlikuje, lahko dolgotrajna izpostavljenost glasnemu hrupu povzroči trajne poškodbe sluha. Zato je dobro nositi zaščito za sluh.

To je bilo koristno (43) Preberi več

Ali lahko električno orodje shranim v lopi ali garaži? Potrjeno

Na splošno lahko električno orodje shranite v lopi ali garaži, tudi če tam včasih zmrzne. Za življenjsko dobo električnega orodja pa je bolje, da ga hranite v suhem prostoru brez večjih temperaturnih nihanj. V lopi ali garaži lahko razlike v temperaturi povzročijo nastanek kondenza, ki lahko povzroči rjo. Poleg tega orodja, ki delujejo na baterije, delujejo krajše in se pri zelo nizkih temperaturah ne polnijo tako dobro. Da bi bili prepričani, kako je treba vaše električno orodje shraniti, vedno temeljito preberite uporabniški priročnik.

To je bilo koristno (13) Preberi več