Priročnik Hikoki CJ 18DSL Vbodna žaga

Priročnik

4

English

18. Use chip cover

○ Chip cover prevents chips from fl ying off and improves

the effi ciency of dust collector.

○ There is a possibility that chip cover is frosted when

cutting the metal.

19. Use sub base (sold separately)

○ Using the sub base made from steel will reduce abrasion

of aluminium base especially in cutting metals. Attach

the sub base to the bottom surface of base by attached 4

screws.

○ Using the sub base made from plastic will reduce

scratching of cut surface. Attach the sub base to the

bottom surface of base by attached 4 screws.

20. In order to prevent blade dislodging, damage or

excessive wear on the plunger, please make sure to

have surface of the base plate attached to the work piece

while sawing.

21 At low speed do not cut a wood with a thickness of more

than 10 mm or metal with a thickness of more than 1 mm.

22. To ensure accurate cutting when using the guide, always

set the orbital position to “0”.

23. When sawing a small circular arc, reduce the feeding

speed of the machine. If the machine is fed too fast, it

could cause the blade to break.

24. Circular cutting must be done with the blade

approximately vertical to the bottom surface of the base.

25. When cutting metallic materials, use an appropriate

cutting fl uid (spindle oil, soapy water, etc.) to prolong the

bladeʼs service life.

26. Angular cutting can not be done when adopting dust

collector.

27. Connecting with cleaner (sold separately)

By connecting with cleaner through dust collector and

adapter (sold separately), most of dust can be collected.

CAUTION ON LITHIUM-ION BATTERY

To extend the lifetime, the lithium-ion battery equips with the

protection function to stop the output.

In the cases of 1 to 3 described below, when using this

product, even if you are pulling the switch, the motor may

stop. This is not the trouble but the result of protection

function.

1. When the battery power remaining runs out, the motor

stops.

In such a case, charge it up immediately.

2. If the tool is overloaded, the motor may stop. In this

case, release the switch of tool and eliminate causes of

overloading. After that, you can use it again.

3. If the battery is overheated under overload work, the

battery power may stop.

In this case, stop using the battery and let the battery

cool. After that, you can use it again.

Furthermore, please heed the following warning and caution.

WARNING

In order to prevent any battery leakage, heat generation,

smoke emission, explosion and ignition beforehand, please

be sure to heed the following precautions.

1. Make sure that swarf and dust do not collect on the

battery.

○ During work make sure that swarf and dust do not fall on

the battery.

○ Make sure that any swarf and dust falling on the power

tool during work do not collect on the battery.

○ Do not store an unused battery in a location exposed to

swarf and dust.

○ Before storing a battery, remove any swarf and dust that

may adhere to it and do not store it together with metal

parts (screws, nails, etc.).

2. Do not pierce battery with a sharp object such as a

nail, strike with a hammer, step on, throw or subject the

battery to severe physical shock.

3. Do not use an apparently damaged or deformed battery.

4. Do not use the battery in reverse polarity.

5. Do not connect directly to an electrical outlets or car

cigarette lighter sockets.

6. Do not use the battery for a purpose other than those

specifi ed.

7. If the battery charging fails to complete even when a

specifi ed recharging time has elapsed, immediately stop

further recharging.

8. Do not put or subject the battery to high temperatures or

high pressure such as into a microwave oven, dryer, or

high pressure container.

9. Keep away from fi re immediately when leakage or foul

odor are detected.

10. Do not use in a location where strong static electricity

generates.

11. If there is battery leakage, foul odor, heat generated,

discolored or deformed, or in any way appears abnormal

during use, recharging or storage, immediately remove it

from the equipment or battery charger, and stop use.

12. Do not immerse the battery or allow any fl uids to fl ow

inside. Conductive liquid ingress, such as water, can

cause damage resulting in fi re or explosion. Store your

battery in a cool, dry place, away from combustible and

fl ammable items. Corrosive gas atmospheres must be

avoided.

CAUTION

1. If liquid leaking from the battery gets into your eyes,

do not rub your eyes and wash them well with fresh

clean water such as tap water and contact a doctor

immediately.

If left untreated, the liquid may cause eye-problems.

2. If liquid leaks onto your skin or clothes, wash well with

clean water such as tap water immediately.

There is a possibility that this can cause skin irritation.

3. If you fi nd rust, foul odor, overheating, discolor,

deformation, and/or other irregularities when using the

battery for the fi rst time, do not use and return it to your

supplier or vendor.

WARNING

If a conductive foreign matter enters in the terminal of lithium

ion battery, the battery may be shorted, causing fi re. When

storing the lithium ion battery, obey surely the rules of

following contents.

○ Do not place conductive debris, nail and wires such as

iron wire and copper wire in the storage case.

○ To prevent shorting from occurring, load the battery in

the tool or insert securely the battery cover for storing

until the ventilator is not seen.

0000Book̲CJ18DSL.indb40000Book̲CJ18DSL.indb4 2019/07/2518:54:362019/07/2518:54:36

Ocena

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Hikoki CJ 18DSL Vbodna žaga. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Hikoki. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Hikoki CJ 18DSL Vbodna žaga v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Vsi priročniki za Hikoki Vbodne žage
Več priročnikov za Vbodne žage

Pogosto zastavljena vprašanja o Hikoki CJ 18DSL Vbodna žaga

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.

Podobni izdelki

Priročnik

Hikoki CJ 36DB Vbodna žaga

Priročnik

Hikoki CJ 65V3 Vbodna žaga

Priročnik

Hikoki CJ 18DA Vbodna žaga

Priročnik

Hikoki CJ 110MV Vbodna žaga

Priročnik

Ryobi EJS-600QEO Vbodna žaga

Priročnik

Bosch AdvancedCut 50 Vbodna žaga

Priročnik

Parkside IAN 321225 Vbodna žaga

Priročnik

Erba 33621 Vbodna žaga

Sorodne kategorije