Home > Naredi sam > Rotacijska kladiva > Hikoki Rotacijska kladiva > Hikoki DH 25DL Rotacijsko kladivo

Priročnik Hikoki DH 25DL Rotacijsko kladivo

Potrebujete priročnik za vaš Hikoki DH 25DL Rotacijsko kladivo? Spodaj si lahko brezplačno ogledate in prenesete PDF priročnik v slovenščini. Ta izdelek ima trenutno 4 pogosto zastavljeni vprašanji, 0 komentarjev in ima 0 glasov. Če to ni priročnik, ki ga želite, nas kontaktirajte.

Ali je vaš izdelek okvarjen in v priročniku ne najdete rešitve? Obiščite Repair Café za brezplačno popravilo.

Priročnik

English

c) When battery pack is not in use, keep it away

from other metal objects, like paper clips, coins,

keys, nails, screws or other small metal objects,

that can make a connection from one terminal to

another.

Shorting the battery terminals together may cause

burns or a ﬁ re.

d) Under abusive conditions, liquid may be ejected

from the battery; avoid contact. If contact

accidentally occurs, ﬂ ush with water. If liquid

contacts eyes, additionally seek medical help.

Liquid ejected from the battery may cause irritation or

burns.

6) Service

a) Have your power tool serviced by a qualiﬁ ed

repair person using only identical replacement

parts.

This will ensure that the safety of the power tool is

maintained.

PRECAUTION

Keep children and inﬁ rm persons away.

When not in use, tools should be stored out of reach of

children and inﬁ rm persons.

CORDLESS ROTARY HAMMER

SAFETY WARNINGS

1. Wear ear protectors

Exposure to noise can cause hearing loss.

2. Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

3. Hold power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory may contact hidden wiring.

Cutting accessory contacting a "live" wire may make

exposed metal parts of the power tool "live" and could

give the operator an electric shock.

ADDITIONAL SAFETY WARNINGS

1. Do not allow foreign matter to enter the hole for

connecting the rechargeable battery.

2. Never disassemble the rechargeable battery and

charger.

3. Never short-circuit the rechargeable battery.

Shortcircuiting the battery will cause a great electric

current and overheat. It results in burn or damage to the

battery.

4. Do not dispose of the battery in ﬁ re. If the battery is burnt,

it may explode.

5. When using this unit continuously, the unit may overheat,

leading to damage in the motor and switch. Please leave

it without using it for approximately 15 minutes.

6. Do not insert object into the air ventilation slots of the

charger. Inserting metal objects or inﬂ ammables into the

charger air ventilation slots will result in electrical shock

hazard or damaged charger.

7. Bring the battery to the shop from which it was purchased

as soon as the post-charging battery life becomes too

short for practical use. Do not dispose of the exhausted

battery.

8. Before starting to break, chip or drill into a wall, ﬂ oor or

ceiling, thoroughly conﬁ rm that such items as electric

cables or conduits are not buried inside.

9. Ensure that the power switch is in the OFF position. If the

battery is installed while the power switch is in the ON

position, the power tool will start operating immediately,

which could cause a serious accident.

10. Do not touch the bit during or immediately after

operation. The bit becomes very hot during operation

and could cause serious burns.

11. Always hold the body handle and side handle of the

power tool ﬁ rmly. Otherwise the counterforce produced

may result in inaccurate and even dangerous operation.

12. Wear a dust mask

Do not inhale the harmful dusts generated in drilling or

chiseling operation. The dust can endanger the health of

yourself and bystanders.

13. Make sure that the battery is installed ﬁ rmly. If it is at all

loose it could come oﬀ and cause an accident.

14. To prevent accidents, make sure to turn the switch oﬀ

and pull out the battery before changing accessories,

storing, carrying or when not using the tools.

15. Mounting the drill bit

○ To prevent accidents, make sure to turn the switch oﬀ

and pull out the battery.

○ When using tools such as bull points, drill bits, etc.,

make sure to use the genuine parts designated by our

company.

○ Clean the shank portion of the drill bit.

○ Check the latching by pulling on the drill bit.

16. Operate the change lever only when the motor is at a

full stop. Operating the change lever while the motor is

running may cause the tip tool to unexpectedly rotate

and result in an accident. (Fig. 7)

17. Rotation + hammering

When the drill bit touches construction iron bar, the bit

will stop immediately and the rotary hammer will react

to revolve. Therefore ﬁ rmly tighten the side handle, hold

the body handle and side handles.

18. Rotation only

○ To drill wood or metal material using the drill chuck and

chuck adapter (optional accessories).

○ Application of force more than necessary will not only

expedite the work, but will deteriorate the tip edge of the

drill bit and reduce the service life of the rotary hammer

in addition.

○ Drill bits may snap oﬀ while withdrawing the rotary

hammer from the drilled hole. For withdrawing, it is

important to use a pushing motion.

○ Do not attempt to drill anchor holes or holes in concrete

with the machine set in the rotation only function.

○ Do not attempt to use the rotary hammer in the rotation

and striking mode with the drill chuck and chuck adapter

attached. This would seriously shorten the service life of

every component of the machine.

19. Selecting the Power / Save mode

○ The hammering force of the hammer can be increased or

decreased to conform with intended usage, by operating

the shift knob as per Fig. 11. Adjust the force to match

the usage intended.

○ Do not drill holes in wood with the “SAVE“ mode. There

is a likelihood that the motor will burn out because it can

easily lock up due to the low power.

CAUTION ON LITHIUM-ION BATTERY

To extend the lifetime, the lithium-ion battery equips with the

protection function to stop the output.

In the cases of 1 to 3 described below, when using this

product, even if you are pulling the switch, the motor may

stop. This is not the trouble but the result of protection

function.

1. When the battery power remaining runs out, the motor

stops.

In such a case, charge it up immediately.

2. If the tool is overloaded, the motor may stop. In this

case, release the switch of tool and eliminate causes of

overloading. After that, you can use it again.

0000Book̲DH25DL.indb30000Book̲DH25DL.indb3 2017/12/0116:42:492017/12/0116:42:49

Prenesi priročnik v slovenščini (PDF, 17.88 MB)

(Upoštevajte okolje in natisnite ta priročnik le, če je res potrebno)

Ocena

Povejte nam, kaj menite o Hikoki DH 25DL Rotacijsko kladivo, tako da oddate oceno izdelka. Ali želite deliti svoje izkušnje z izdelkom ali postaviti vprašanje? Oddajte komentar na dnu strani.

Ali ste zadovoljni z Hikoki DH 25DL Rotacijsko kladivo?
Da Ne

Bodite prvi, ki boste ocenili ta izdelek

0 glasovi

Pridružite se pogovoru o tem izdelku

Tukaj lahko delite svoje mnenje o Hikoki DH 25DL Rotacijsko kladivo. Če imate vprašanje, najprej natančno preberite priročnik. Zahtevo za priročnik lahko opravite z uporabo našega kontaktnega obrazca.

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Hikoki DH 25DL Rotacijsko kladivo. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Hikoki. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Hikoki DH 25DL Rotacijsko kladivo v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Blagovna znamka	Hikoki
Model	DH 25DL
Kategorija	Rotacijska kladiva
Vrsta datoteke	PDF
Velikost datoteke	17.88 MB

Vsi priročniki za Hikoki Rotacijska kladiva
Več priročnikov za Rotacijska kladiva

Pogosto zastavljena vprašanja o Hikoki DH 25DL Rotacijsko kladivo

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.

Kakšna je razlika med udarnim vrtalnikom in vrtalnim kladivom? Potrjeno

Udarni vrtalniki se lahko uporabljajo za vrtanje lukenj v opeke in zidove malte. Za vrtanje lukenj v betonske stene potrebujete vrtalno kladivo.

To je bilo koristno (260) Preberi več

Kaj pomeni Joule (J) v zvezi s kladivi? Potrjeno

Število Joule je pokazatelj energije udarca vrtalnega kladiva. Za vrtanje običajnih lukenj v beton zadostuje kladivo z 2,2 J.

To je bilo koristno (219) Preberi več

Ali moram pri uporabi svedra nositi zaščito za sluh? Potrjeno

Ja, moral bi. Čeprav se količina hrupa, ki ga proizvaja sveder, med različnimi znamkami in modeli razlikuje, lahko dolgotrajna izpostavljenost glasnemu hrupu povzroči trajne poškodbe sluha. Zato je dobro nositi zaščito za sluh.

To je bilo koristno (138) Preberi več

Ali lahko električno orodje shranim v lopi ali garaži? Potrjeno

Na splošno lahko električno orodje shranite v lopi ali garaži, tudi če tam včasih zmrzne. Za življenjsko dobo električnega orodja pa je bolje, da ga hranite v suhem prostoru brez večjih temperaturnih nihanj. V lopi ali garaži lahko razlike v temperaturi povzročijo nastanek kondenza, ki lahko povzroči rjo. Poleg tega orodja, ki delujejo na baterije, delujejo krajše in se pri zelo nizkih temperaturah ne polnijo tako dobro. Da bi bili prepričani, kako je treba vaše električno orodje shraniti, vedno temeljito preberite uporabniški priročnik.

To je bilo koristno (70) Preberi več