Priročnik Hikoki G 10SS2 Kotna brusilka

Priročnik

6

English

5. Maintenance of the motor

WARNING

Always wear protective goggles and dust respirators

when blowing air from the tail cover air hole with the use

of an air gun, etc.

Failure to observe this may result in ejected dust being

inhaled or entering your eyes.

The motor unit winding is the very “heart” of the power tool.

Exercise due care to ensure the winding does not become

damaged and/or wet with oil or water.

NOTE

When work has been fi nished, blow air containing no

moisture from the tail cover air hole with the use of an

air gun, etc., while running the motor without any load

applied. This is eff ective in removing any dirt and dust

that has accumulated. Dirt and dust collecting inside the

motor may result in malfunctions.

CAUTION

In the operation and maintenance of power tools, the

safety regulations and standards prescribed in each

country must be observed.

GUARANTEE

We guarantee HiKOKI Power Tools in accordance with

statutory/country specifi c regulation. This guarantee does

not cover defects or damage due to misuse, abuse, or

normal wear and tear. In case of complaint, please send

the Power Tool, undismantled, with the GUARANTEE

CERTIFICATE found at the end of this Handling instruction,

to a HiKOKI Authorized Service Center.

IMPORTANT

Correct connection of the plug

The wires of the main lead are coloured in accordance

with the following code:

Blue: — Neutral

Brown: — Live

As the colours of the wires in the main lead of this tool may

not correspond with the coloured markings identifying the

terminals in your plug proceed as follows:

The wire coloured blue must be connected to the terminal

marked with the letter N or coloured black. The wire

coloured brown must be connected to the terminal marked

with the letter L or coloured red. Neither core must be

connected to the earth terminal.

NOTE:

This requirement is provided according to BRITISH

STANDARD 2769: 1984.

Therefore, the letter code and colour code may not be

applicable to other markets except The United Kingdom.

Information concerning airborne noise and vibration

The measured values were determined according to

EN60745 and declared in accordance with ISO 4871.

Measured A-weighted sound power level: 99 dB (A).

Measured A-weighted sound pressure level: 88 dB (A).

Uncertainty K: 3 dB (A).

Wear hearing protection.

Vibration total values (triax vector sum) determined

according to EN60745.

Surface grinding:

Vibration emission value

a

h

, AG = 7.9 m/s

2

Uncertainty K = 1.5 m/s

2

The declared vibration total value has been measured in

accordance with a standard test method and may be used

for comparing one tool with another.

It may also be used in a preliminary assessment of exposure.

WARNING

○ The vibration emission during actual use of the power

tool can diff er from the declared total value depending in

the ways in which the tool is used.

○ Identify safety measures to protect the operator that

are based on an estimation of exposure in the actual

conditions of use (taking account of all parts of the

operating cycle such as the times when the tool is

switched off and when it is running idle in addition to the

trigger time).

NOTE

Due to HiKOKI’s continuing program of research and

development, the specifi cations herein are subject to

change without prior notice.

0000Book̲G10SS2.indb60000Book̲G10SS2.indb6 2017/12/0413:44:582017/12/0413:44:58

Ocena

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Hikoki G 10SS2 Kotna brusilka. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Hikoki. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Hikoki G 10SS2 Kotna brusilka v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Vsi priročniki za Hikoki Kotne brusilke
Več priročnikov za Kotne brusilke

Pogosto zastavljena vprašanja o Hikoki G 10SS2 Kotna brusilka

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.

Podobni izdelki

Priročnik

Hikoki G 10SN Kotna brusilka

Priročnik

Hikoki G 10SN2 Kotna brusilka

Priročnik

Hikoki G 23MRUA Kotna brusilka

Priročnik

Hikoki G 23SWU2 Kotna brusilka

Priročnik

Hikoki G 3613DA Kotna brusilka

Priročnik

Hikoki G 23SU Kotna brusilka

Priročnik

Hikoki G 18DBBL Kotna brusilka

Priročnik

Hikoki G 12VA Kotna brusilka

Sorodne kategorije