Priročnik Parkside IAN 102784 Večdelno orodje

Priročnik

8 GB

General power tool safety warnings General power tool safety warnings / Assembly

c) Prevent unintentional starting. Ensure

the switch is in the off-position before

connecting to power source and / or

battery pack, picking up or carrying

the tool. Carrying power tools with your fing

er

o

n the switch or energising power tools that hav

e

the switch on invites accidents.

d) Remove any adjusting key or wrench

before turning the power tool on. A

wrench or a key left attached to a rotating part

of the power tool may result in personal injury.

e) Do not overreach. Keep proper foot-

ing and balance at all times. This enables

better control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose

clothing or jewellery. Keep your hair,

clothing and gloves away from mov-

ing parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g) If devices are provided for the connec-

tion of dust extraction and collection

facilities, ensure these are connected

and properly used. Use of dust collection

can reduce dust-related hazards.

4. Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your applica

tion.

The correct power tool will do the job better

and safer at the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power

tool that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power

source and / or the battery pack from

the power tool before making any ad-

justments, changing accessories, or

storing power tools. Such preventive safety

measures reduce the risk of starting the power

tool accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of un-

trained users.

e) Maintain power tools. Check for mis-

alignment or binding of moving parts,

breakage of parts and any other con-

dition that may affect the power tool’s

operation. If damaged, have the power

tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended could

result in a hazardous situation.

5. Service

a) Have your power tool serviced by a

qualified repair person using only

iden-

tical replacement parts. This will ensure

that the safety of the power tool is maintained.

Safety advice relating specifi-

cally to this multifunction tool

When working, hold the electrical

power tool firmly with both hands and

keep a proper footing and balance. It

is safer to guide the electrical power tool using

both hands.

Secure the workpiece. A workpiece held

in a clamp or vice is kept more securely in

place than one held by your hand.

Keep your working area clean. Mixtures

of materials can be particularly dangerous.

Light metal alloy dust may burn or explode.

Do not operate the device if the mains

lead or mains plug is damaged.

Do not touch the mains lead if it be-

comes damaged or cut through while

Ocena

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Parkside IAN 102784 Večdelno orodje. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Parkside. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Parkside IAN 102784 Večdelno orodje v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Vsi priročniki za Parkside Večdelna orodja
Več priročnikov za Večdelna orodja

Pogosto zastavljena vprašanja o Parkside IAN 102784 Večdelno orodje

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.

Podobni izdelki

Priročnik

Parkside PMFW 310 D2 Večdelno orodje

Priročnik

Parkside IAN 104027 Večdelno orodje

Priročnik

Parkside PAMFW 12 B2 Večdelno orodje

Priročnik

Parkside IAN 93266 Večdelno orodje

Priročnik

Parkside IAN 315570 Večdelno orodje

Priročnik

Parkside IAN 327281 Večdelno orodje

Priročnik

Parkside IAN 96269 Večdelno orodje

Priročnik

Parkside IAN 437518 Večdelno orodje

Sorodne kategorije