Priročnik Parkside IAN 106629 Povratna žaga

Priročnik

8 GB

e) Do not overreach. Keep proper foot-

ing and balance at all times. This enables

better control of the power tool in unexpected

situations.

f) Dress properly. Do not wear loose

clothing or jewellery. Keep your hair,

clothing and gloves away from mov-

ing parts. Loose clothes, jewellery or long

hair can be caught in moving parts.

g) If devices are provided for the connec-

tion of dust extraction and collection

facilities, ensure these are connected

and properly used. Use of dust collection

can reduce dust-related hazards.

4. Power tool use and care

a) Do not force the power tool. Use the

correct power tool for your applica

tion.

The correct power tool will do the job better

and safer at the rate for which it was designed.

b) Do not use the power tool if the switch

does not turn it on and off. Any power

tool that cannot be controlled with the switch is

dangerous and must be repaired.

c) Disconnect the plug from the power

source and / or the battery pack from

the power tool before making any ad-

justments, changing accessories, or

storing power tools. Such preventive safety

measures reduce the risk of starting the power

tool accidentally.

d) Store idle power tools out of the reach

of children and do not allow persons

unfamiliar with the power tool or these

instructions to operate the power tool.

Power tools are dangerous in the hands of un-

trained users.

e) Maintain power tools. Check for mis-

alignment or binding of moving parts,

breakage of parts and any other con-

dition that may affect the power tool’s

operation. If damaged, have the power

tool repaired before use. Many accidents

are caused by poorly maintained power tools.

f) Keep cutting tools sharp and clean.

Properly maintained cutting tools with sharp

cutting edges are less likely to bind and are

easier to control.

g) Use the power tool, accessories and

tool bits etc. in accordance with these

instructions, taking into account the

working conditions and the work to

be performed. Use of the power tool for

operations different from those intended could

result in a hazardous situation.

5. Service

a) Have your power tool serviced by a

qualified repair person using only

iden-

tical replacement parts. This will ensure

that the safety of the power tool is maintained.

Safety advice relating

specifically to sabre saws

To avoid the danger of injury, fire and

damage to your health:

Hold the device by the insulated han-

dle surfaces when performing work

where there is danger of the tool used

striking hidden electrical lines or its

own power cable. Contact with a live wire

could cause metal parts of the device to be-

come live and lead to electric shock.

If you use the device outdoors, always connect

it through a residual current device (RCD) with

a maximum trip current of 30 mA.

Securely support the workpiece. Use clamps or

a vice to grip the workpiece firmly. This is much

safer than holding it in your hand.

Never support yourself by placing your hands

near or in front of the device or the workpiece

surface. A slip can result in injury.

If a dangerous situation arises, pull the mains

plug immediately out of the mains socket.

Always work with the mains lead leading away

from the rear of the device.

DANGER OF FIRE FROM FLYING SPARKS

!

Sawing metal creates flying sparks.

General power tool safety warnings / Before useGeneral power tool safety warnings

Ocena

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Parkside IAN 106629 Povratna žaga. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Parkside. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Parkside IAN 106629 Povratna žaga v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Vsi priročniki za Parkside Povratne žage
Več priročnikov za Povratne žage

Pogosto zastavljena vprašanja o Parkside IAN 106629 Povratna žaga

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.

Podobni izdelki

Priročnik

Parkside IAN 85969 Povratna žaga

Priročnik

Parkside IAN 420423 Povratna žaga

Priročnik

Parkside IAN 310922 Povratna žaga

Priročnik

Parkside IAN 295715 Povratna žaga

Priročnik

Parkside IAN 413752 Povratna žaga

Priročnik

Parkside IAN 61099 Povratna žaga

Priročnik

Parkside IAN 71919 Povratna žaga

Priročnik

Parkside IAN 290742 Povratna žaga

Sorodne kategorije