Priročnik REV 82350103 Zvonec

Priročnik

General information

Please thoroughly read the following operating instructions before placing the device

into service and keep for future reference. The bell button is suitable for operation in

protected outdoor areas and not in harsh environments. The wireless chime is intended for

installation in dry indoor areas (IP20).

Installation may only be carried out by a qualified electrician!

Notes

• The wireless chime is only designed for use with the appropriate batteries.

• This wireless chime set consists of a transmitter and a receiver.

• This wireless chime set offers you the possibility to set up a bell system without wiring.

• This set is not intended for integration into an existing bell system.

• The range between transmitter and receiver is maximum 50m in the open field. The radio signal

is transmitted through walls, walls, furniture and other obstacles, but depends on the structural

conditions - walls, especially reinforced concrete walls, heat-insulating glazing and ceilings lead to a

reduction in range.

• Shielding caused by metal parts can severely impair reception, so that the signal cannot be transmitted.

For this reason, never attach the transmitter to metal surfaces.

• If the product is not in use for a long period of time, remove the batteries.

• The product has no replaceable parts. Do not try to open or repair the product.

Technical Data

Type: F-688D

Range (free field) max. 50m

Frequency: 433,92MHz

Frequency band: 433,05 – 434,79MHz

Max. transmission power: <10mW

Battery: Receiver: 3x 1,5V LR03 (AAA) (not included in delivery)

Transmitter: 1x 3V CR2032 (included in delivery)

Degree of protection: Receiver: IP20 (for dry indoor use only)

Transmitter: IP44 (protected outdoor area)

Volume: 25-125dB (4-stage adjustable)

Number of melodies: 58 melodies for selection

Standby consumption: Gong: <5mA

Mode: Sound + flash (fixed)

Only sound

Only flash

Sound + continuous light (can be used as night light)

Degree of protection: Safety Extra Low Voltage

GB

Safety Instructions for batteries:

• Incorrect polarity of the batteries can destroy the unit.

• Do not store batteries within reach of children, especially those that can be swallowed.

• Do not attempt to reactivate batteries by heating or similar measures.

• Primary batteries must not be charged as this can lead to electrolyte leakage, explosion or fire.

• Do not immerse batteries in water and store them in a dry and cool place, not in a damp place.

• Do not throw batteries into the fire, do not open them or solder or weld them yourself.

• Do not short-circuit batteries.

Coding

The gong and bell button in this set have been encoded in the factory. If you would like to reset the

coding or add more gongs/bell buttons, proceed as follows:

Coding the gong and bell button:

Press the ‘code’ button. If the gong beeps, press the bell button within 5 seconds. If the gong

sounds, coding is successful. If the gong does not sound, press the bell button again until coding is

successful. To code several bell buttons, repeat the process outlined above.

Deleting coding:

Press and hold the ‘code’ button for around 10 seconds until the gong sounds. All coding is comple-

tely deleted.

Note: The coding between the gong and the bell button remains until you delete the coding as

described above. This is the case even if you remove the batteries.

Up to 6 gongs can be connected to one bell button.

Up to 6 bell buttons can be connected to one gong.

Note: If you connect several (max. 6) bell buttons to a gong, it is not possible to determine which bell

button is being pressed, as the chosen melody is saved on the gong and not on the bell button.

Set up

Remove the insulation strip in the battery compartment of the bell button and put the batteries in the

gong (for the battery type see ‘Technical Data’).

Volume setting / melody selection

Press the ‘volume’ / ‘melody’ button until you hear the correct volume/melody. Your selection is

automatically saved.

Volume

Melodies

Code

ANL_F-688D.indd 5-6 18.02.2019 14:30:07

Ocena

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš REV 82350103 Zvonec. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate REV. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš REV 82350103 Zvonec v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Vsi priročniki za REV Zvonci
Več priročnikov za Zvonci

Podobni izdelki

Priročnik

REV 82610103 Zvonec

Priročnik

REV 82620103 Zvonec

Priročnik

REV 83970103 Zvonec

Priročnik

REV 46870 Zvonec

Priročnik

REV 0514911555 Zvonec

Priročnik

REV 82630103 Zvonec

Priročnik

REV 82420103 Zvonec

Priročnik

REV 0514903555 Zvonec

Sorodne kategorije