Priročnik Ryobi RLT183115C Kosilnica z nitko
Potrebujete priročnik za vaš Ryobi RLT183115C Kosilnica z nitko? Spodaj si lahko brezplačno ogledate in prenesete PDF priročnik v slovenščini. Ta izdelek ima trenutno 0 pogosto zastavljeni vprašanji, 0 komentarjev in ima 0 glasov. Če to ni priročnik, ki ga želite, nas kontaktirajte.
Ali je vaš izdelek okvarjen in v priročniku ne najdete rešitve? Obiščite Repair Café za brezplačno popravilo.
Priročnik
Loading…
2 | English
■ Never fit a metal replacement line.
■ Keep hands and feet away from the cutting means at
all times and especially when switching on the motor.
■ Beware, the cutting elements continue to rotate after
the motor is switched off.
■ Beware of objects thrown by the cutting means. Clear
debris like small stones, gravel and other foreign
objects from the work area before starting operation.
Wires or string may become entangled with the cutting
means.
■ Switch off and remove battery pack before:
● servicing
● leaving the product unattended
● cleaning your product or clearing a blockage
● changing accessories
● checking for any damage after hitting an object
● checking for any damage if the product starts to
vibrate abnormally
● performing maintenance
■ The small blade fitted to the lawn guard is designed to
trim the new extended line to the correct length for safe
and optimum performance. It is very sharp, do not touch
it particularly when cleaning the product.
■ Always ensure that ventilation openings are kept clear
of debris.
■ Make sure the cutting head attachment is properly
installed and securely fastened.
■ Make sure all guards, deflectors, and handles are
properly and securely attached.
■ Do not modify the product in any way, this may increase
the risk of injury to yourself or others.
■ Use only the manufacturer’s replacement cutting line.
Do not use any other cutting attachment.
■ Immediately switch off and remove the battery pack
in the event of accident or breakdown. Don’t operate
the product again until it has been fully checked by an
authorised service centre.
WARNING
Ensure that the cut-off blade is properly positioned and
secured before each use.
TRANSPORTATION AND STORAGE
■ Stop the product and allow it to cool before storing or
transporting.
■ Clean all foreign material from the product. Store it in a
cool dry and well-ventilated place that is inaccessible
to children. Keep away from corrosive agents such
as garden chemicals and de-icing salts. Do not store
outdoors.
■ For storage, always disconnect from power supply and
wind cable.
■ For transportation, secure the product against
movement or falling to prevent injury to persons or
damage to the product.
MAINTENANCE
WARNING
Use only original manufacturer’s replacement parts,
accessories and attachments. Failure to do so can
cause possible injury, poor performance and may void
your warranty.
WARNING
Servicing requires extreme care and knowledge
and should be performed only by a qualifi ed service
technician. For service we suggest you return the
product to your nearest authorized service center for
repair. When servicing, use only identical replacement
parts.
■ Switch off and remove battery pack before conducting
any maintenance or cleaning work.
■ You may make adjustments and repairs described
here. For other repairs, contact the authorised service
agent.
■ For replacement line, use only nylon filament line of
the diameter described in the specification table of this
manual
■ After extending new cutter line, always return the
product to its normal operating position before starting.
■ After each use, clean the product with a soft dry cloth.
Any part that is damaged should be properly repaired or
replaced by an authorised service centre.
■ Check all nuts, bolts, and screws at frequent intervals
for proper tightness to ensure the product is in safe
working condition.
RESIDUAL RISK
Even when the product is used as prescribed, it is still
impossible to completely eliminate certain residual risk
factors. The following hazards may arise in use and the
operator should pay special attention to avoid the following:
■ Injury caused by vibration. Hold the product by
designated handles and restrict working time and
exposure.
■ Exposure to noise can cause hearing injury. Wear ear
protection and limit exposure.
■ Eye injury due to flying debris. Wear eye protection at
all times.
RISK REDUCTION
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud’s Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the fi ngers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices are
all thought to contribute to the development of the these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
■ Keep your body warm in cold weather. When operating
Loading…
Ocena
Povejte nam, kaj menite o Ryobi RLT183115C Kosilnica z nitko, tako da oddate oceno izdelka. Ali želite deliti svoje izkušnje z izdelkom ali postaviti vprašanje? Oddajte komentar na dnu strani.Več o tem priročniku
Zavedamo se, da je lepo imeti papirni priročnik za vaš Ryobi RLT183115C Kosilnica z nitko. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Ryobi. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Ryobi RLT183115C Kosilnica z nitko v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.
Specifikacije
| Blagovna znamka | Ryobi |
| Model | RLT183115C |
| Kategorija | Kosilnice z nitko |
| Vrsta datoteke | |
| Velikost datoteke | 5.5 MB |
Vsi priročniki za Ryobi Kosilnice z nitko
Več priročnikov za Kosilnice z nitko
Pridružite se pogovoru o tem izdelku
Tukaj lahko delite svoje mnenje o Ryobi RLT183115C Kosilnica z nitko. Če imate vprašanje, najprej natančno preberite priročnik. Zahtevo za priročnik lahko opravite z uporabo našega kontaktnega obrazca.