Home > Naredi sam > Rotacijska kladiva > Ryobi Rotacijska kladiva > Ryobi RSDS18X-0 Rotacijsko kladivo

Priročnik Ryobi RSDS18X-0 Rotacijsko kladivo

Potrebujete priročnik za vaš Ryobi RSDS18X-0 Rotacijsko kladivo? Spodaj si lahko brezplačno ogledate in prenesete PDF priročnik v slovenščini. Ta izdelek ima trenutno 4 pogosto zastavljeni vprašanji, 0 komentarjev in ima 0 glasov. Če to ni priročnik, ki ga želite, nas kontaktirajte.

Ali je vaš izdelek okvarjen in v priročniku ne najdete rešitve? Obiščite Repair Café za brezplačno popravilo.

Priročnik

ENGLISH

Original Instructions

Safety, performance, and dependability have been given top

priority in the design of your rotary hammer drill.

INTENDED USE

The rotary hammer drill is intended to be used only by

adults who have read and understood the instructions and

warnings in this manual, and can be considered responsible

for their actions.

The rotary hammer drill is designed to operate without

hammer function into wood and metal. For chiselling and

masonry drilling, the hammer mode may be used.

The rotary hammer drill is designed to operate with drill bits up

to the maximum diameter deﬁ ned in the product speciﬁ cations.

The product is intended for consumer use only.

Do not use the product for any other purpose. Use of the

product for operations different from intended could result in

a hazardous situation.

WARNING! Read all safety warnings, instructions,

illustrations and specifications provided with this

power tool. Failure to follow all instructions listed below

may result in electric shock, ﬁ re and/or serious injury.

Save all warnings and instructions for future reference.

ROTARY HAMMER DRILL SAFETY WARNINGS

SAFETY INSTRUCTIONS FOR ALL OPERATIONS

■ Wear ear protectors. Exposure to noise can cause

hearing loss.

■ Use auxiliary handle(s), if supplied with the tool.

Loss of control can cause personal injury.

■ Hold the power tool by insulated gripping surfaces,

when performing an operation where the cutting

accessory or fasteners may contact hidden wiring.

Cutting accessory or fasteners contacting a “live” wire

may make exposed metal parts of the power tool “live”

and could give the operator an electric shock.

SAFETY INSTRUCTIONS WHEN USING LONG DRILL BITS

WITH ROTARY HAMMERS

■ Always start drilling at low speed and with the bit

tip in contact with the workpiece. At higher speeds,

the bit is likely to bend if allowed to rotate freely without

contacting the workpiece, resulting in personal injury.

■ Apply pressure only in direct line with the bit and do

not apply excessive pressure. Bits can bend causing

breakage or loss of control, resulting in personal injury.

ADDITIONAL SAFETY WARNINGS

■ Clamp workpiece with a clamping device. Unclamped

workpieces can cause severe injury and damage.

■ When working in walls, ceiling, or floor, take care to

avoid electric cables and gas or waterpipes.

■ Injuries may be caused, or aggravated, by prolonged

use of a tool. When using any tool for prolonged periods,

ensure you take regular breaks.

■ Dust created by operating the product can cause

respiratory injury. Wear appropriate dust control mask

with filters suitable for protecting against particles from

the material being worked on.

■ The product will restart automatically if stalled. Switch

off the product immediately if it stalls. Do not switch

on the product again while it is still stalled, as doing so

could trigger a sudden recoil with a high reactive force.

Determine why the product stalled and rectify this,

paying heed to the safety instructions.

■ Ambient temperature range for tool during operation is

between 0 ˚C and 40˚ C.

■ Ambient temperature range for tool storage is between

0 ˚C and 40˚ C.

■ The recommended ambient temperature range for the

charging system during charging is between 10 ˚C and

38˚ C.

ADDITIONAL BATTERY SAFETY WARNINGS

■ To reduce the risk of fire, personal injury, and product

damage due to a short circuit, never immerse your

tool, battery pack or charger in fluid or allow a fluid to

flow inside them. Corrosive or conductive fluids, such

as seawater, certain industrial chemicals, and bleach

or bleach-containing products, etc., can cause a short

circuit.

■ Ambient temperature range for battery during use is

between 0°C and 40°C.

■ Ambient temperature range for battery storage is

between 0°C and 20°C.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national

provisions and regulations.

Follow all special requirements on packaging and labelling

when transporting batteries by a third party. Ensure that

no batteries can come in contact with other batteries

or conductive materials while in transport by protecting

exposed connectors with insulating, non-conductive caps or

tape. Do not transport batteries that are cracked or leaking.

Check with the forwarding company for further advice.

KNOW YOUR PRODUCT

See page 56.

1. Direction of rotation selector

2. SDS+ Chuck

3. Switch trigger

4. Mode selector

5. Handle, insulated gripping surface

6. LED light

7. Battery port

8. Depth guide rod

9. Operator's manual

10. Auxiliary handle, insulated gripping surface

11. Battery pack

12. Charger

MAINTENANCE

■ The product should never be connected to a power

supply when assembling parts, making adjustments,

cleaning, performing maintenance, or when the product

is not in use. Disconnecting the product from the power

supply will prevent accidental starting that could cause

serious injury.

■ When servicing, use only original manufacturer’s

replacement parts, accessories and attachments. Use

of any other parts may create a hazard or cause product

damage.

Prenesi priročnik v slovenščini (PDF, 3.53 MB)

(Upoštevajte okolje in natisnite ta priročnik le, če je res potrebno)

Ocena

Povejte nam, kaj menite o Ryobi RSDS18X-0 Rotacijsko kladivo, tako da oddate oceno izdelka. Ali želite deliti svoje izkušnje z izdelkom ali postaviti vprašanje? Oddajte komentar na dnu strani.

Ali ste zadovoljni z Ryobi RSDS18X-0 Rotacijsko kladivo?
Da Ne

Bodite prvi, ki boste ocenili ta izdelek

0 glasovi

Pridružite se pogovoru o tem izdelku

Tukaj lahko delite svoje mnenje o Ryobi RSDS18X-0 Rotacijsko kladivo. Če imate vprašanje, najprej natančno preberite priročnik. Zahtevo za priročnik lahko opravite z uporabo našega kontaktnega obrazca.

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Ryobi RSDS18X-0 Rotacijsko kladivo. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Ryobi. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Ryobi RSDS18X-0 Rotacijsko kladivo v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Blagovna znamka	Ryobi
Model	RSDS18X-0
Kategorija	Rotacijska kladiva
Vrsta datoteke	PDF
Velikost datoteke	3.53 MB

Vsi priročniki za Ryobi Rotacijska kladiva
Več priročnikov za Rotacijska kladiva

Pogosto zastavljena vprašanja o Ryobi RSDS18X-0 Rotacijsko kladivo

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.

Kakšna je razlika med udarnim vrtalnikom in vrtalnim kladivom? Potrjeno

Udarni vrtalniki se lahko uporabljajo za vrtanje lukenj v opeke in zidove malte. Za vrtanje lukenj v betonske stene potrebujete vrtalno kladivo.

To je bilo koristno (260) Preberi več

Kaj pomeni Joule (J) v zvezi s kladivi? Potrjeno

Število Joule je pokazatelj energije udarca vrtalnega kladiva. Za vrtanje običajnih lukenj v beton zadostuje kladivo z 2,2 J.

To je bilo koristno (219) Preberi več

Ali moram pri uporabi svedra nositi zaščito za sluh? Potrjeno

Ja, moral bi. Čeprav se količina hrupa, ki ga proizvaja sveder, med različnimi znamkami in modeli razlikuje, lahko dolgotrajna izpostavljenost glasnemu hrupu povzroči trajne poškodbe sluha. Zato je dobro nositi zaščito za sluh.

To je bilo koristno (138) Preberi več

Ali lahko električno orodje shranim v lopi ali garaži? Potrjeno

Na splošno lahko električno orodje shranite v lopi ali garaži, tudi če tam včasih zmrzne. Za življenjsko dobo električnega orodja pa je bolje, da ga hranite v suhem prostoru brez večjih temperaturnih nihanj. V lopi ali garaži lahko razlike v temperaturi povzročijo nastanek kondenza, ki lahko povzroči rjo. Poleg tega orodja, ki delujejo na baterije, delujejo krajše in se pri zelo nizkih temperaturah ne polnijo tako dobro. Da bi bili prepričani, kako je treba vaše električno orodje shraniti, vedno temeljito preberite uporabniški priročnik.

To je bilo koristno (70) Preberi več