Home > Dom in dekoracija > Detektorji gibanja > Steinel Detektorji gibanja > Steinel IS 140-2 Detektor gibanja

Priročnik Steinel IS 140-2 Detektor gibanja

Name: Steinel IS 140-2 Detektor gibanja
Brand: Steinel
SKU: IS 140-2
Rating: 23 (13 reviews)

Potrebujete priročnik za vaš Steinel IS 140-2 Detektor gibanja? Spodaj si lahko brezplačno ogledate in prenesete PDF priročnik v slovenščini. Ta izdelek ima trenutno 0 pogosto zastavljeni vprašanji, 5 komentarjev in 13 glasov s povprečno oceno izdelka 23/100. Če to ni priročnik, ki ga želite, nas kontaktirajte.

Ali je vaš izdelek okvarjen in v priročniku ne najdete rešitve? Obiščite Repair Café za brezplačno popravilo.

Priročnik

Principle

Movement triggers lights, alarms and many other devices - for your convenience and safety. The integrated

pyroelectric infrared detector senses the invisible heat radiated from moving objects (people, animals, etc.).

The heat detected in this way is converted electronically into a signal that activates the load connected. Heat

radiation is not detected through obstacles, such as walls or glass, and will therefore not activate the light.

Safety warnings

■ During installation, the electrical wiring being connected must be dead. Therefore, switch off the power first

and use a voltage tester to check that the power supply is disconnected.

■ Installing this unit involves work on the mains voltage supply. This must therefore be carried out

in accordance with applicable national wiring regulations and electrical operating conditions.

(

- VDE 0100,

-ÖVE-ÖNORM E8001-1,



-SEV 1000)

■ Only use genuine replacement parts.

■ Do not dismantle the unit yourself. It must only be repaired by a specialist workshop.

Installation

 – 

L = live conductor (usually black or brown)



Connection with concealed wiring

N = neutral conductor (usually blue)



Connection with exposed wiring

PE = any protective earth conductor (green/yellow)

Attention: Loop the protective-earth conductor through if necessary. A mains power switch for turning the unit

ON and OFF may of course be installed in the mains supply lead. Important: Reversing the connections may

result in damage to the unit. Please note that the circuit must be protected by a 10 A circuit breaker.

Optimum mounting height: 2 m for wall mounting

Function



Twilight setting (factory setting: daylight operation at 2000 lux):

The sensor's response threshold can be infinitely varied from 2 – 2000 lux.

Control dial set to = daylight operation at approx. 2000 lux.

Control dial set to = night-time operation at approx. 2 lux.

To adjust the detection zone in daylight, the control dial must be set to (daylight operation).

Time setting (factory setting: 8 sec.): Light 'ON' time can be set from 8 secs. to 35 mins.

Control dial set to – = shortest time (8 sec.)

Control dial set to + = longest time (35 min.)

When setting the detection zone, we recommend selecting the shortest time.

Adjust detection zone at swivel mount



–



–



Reach can be adjusted to between 2 and 14 m by tilting the lens through 90°.



Swivelling for align-

ment on the wall.



Reach 1 – 14 m. Max. setting permits detection along the building wall



Using

adhesive shrouds, e.g. to mask out paths or neighbouring property. Important: The most reliable way of detect-

ing movement is to install the sensor so that it points across the direction in which a person would walk and by

ensuring that no obstacles (such as trees, walls etc.) obstruct the line of vision. Reach is restricted when you

walk straight towards the sensor.

Troubleshooting (Fault / Cause ➩

Remedy

)

No power / Fuse faulty, not switched on ➩

new fuse, turn power switch ON, check lead with voltage tester.

Will not switch ON / Surroundings still too bright ➩

wait until response threshold is reached or adjust setting

Bulb faulty ➩

change bulb /

Power switch OFF ➩

switch on /

Detection zone not properly targeted ➩

readjust.

Will not switch OFF / Permanent movement in the detection zone ➩

adjust detection zone

. Keeps switching

ON/OFF / There is a light in the detection zone ➩

change detection zone, increase distance

. Switches ON

when unwanted / Detecting cars on the road, for example ➩

change detection zone, tilt sensor down.

Reach changing / Differing ambient temperatures ➩

at low temperatures, shorten reach by tilting sensor

down; at high temperatures, tilt sensor up.

Declaration of conformity

This product complies with Low Voltage Directive 2006/95/EC, EMC Directive 2004/108/EC and RoHS Directive

2002/95/EC.

Functional warranty

This STEINEL product has been manufactured with great care, tested for proper operation and safety in accordance

with applicable regulations and then subjected to random sample inspection. STEINEL guarantees that it is perfect

condition and proper working order. The warranty period is 36 months, starting from the date of sale to the con-

sumer. We will remedy defects caused by material flaws or manufacturing faults. The warranty will be met by

repair or replacement of defective parts at our own discretion. The warranty does not cover damage to wear parts,

nor does it cover damage or defects caused by improper treatment, maintenance or the use on non-genuine parts.

Further consequential damage to other objects shall be excluded. The warranty will only be honoured if the product

is sent to the appropriate Service Centre fully assembled and well packed with a brief description of the fault,

receipt or invoice (date of purchase and dealer's stamp).

Service:

Our Customer Service Department will repair faults not covered by warranty or after the warranty period. Please

send the product well packed to your nearest Service Centre.

ENGLISH

710

11a

IS 140-2

109599501 02/2012_C

Prenesi priročnik v slovenščini (PDF, 18.03 MB)

(Upoštevajte okolje in natisnite ta priročnik le, če je res potrebno)

Ocena

Povejte nam, kaj menite o Steinel IS 140-2 Detektor gibanja, tako da oddate oceno izdelka. Ali želite deliti svoje izkušnje z izdelkom ali postaviti vprašanje? Oddajte komentar na dnu strani.

Ali ste zadovoljni z Steinel IS 140-2 Detektor gibanja?
Da Ne

23%

77%

13 glasovi

Pridružite se pogovoru o tem izdelku

Tukaj lahko delite svoje mnenje o Steinel IS 140-2 Detektor gibanja. Če imate vprašanje, najprej natančno preberite priročnik. Zahtevo za priročnik lahko opravite z uporabo našega kontaktnega obrazca.

JEAN LION 11-03-2021
POZDRAV IMAM PRAVKOKOTNI MODEL IZ NERJAVEGA JEKLA S SPODAJ KROGALO, KI SLUŽI KOT SENZOR NE RAZUMEM, KAKO SE FUNKCIJE AKTIVIRAJO TO JE MODEL S SONCEM, LUNO IN URO, TAKO SO PRED TISKANJEM NA GUMIKE ZA MENI BO ZA DA BO PONOČ 5MN HVALA KO PRITISKAM GUMBJE SE SVETI RDEČA LUČKA IN TISKAM GA POSKUŠAM NASTAVITI SE VEČ NE IZKLJUČI

odgovori | To je bilo koristno (11) (Prevedel Google)

Leroy Jean Luc 19-12-2020
Pozdravljeni, kupim Steinelov detektor gibanja vijolična žica zategne na kaj

odgovori | To je bilo koristno (10) (Prevedel Google)

erik klerkx 07-01-2022
Ali moram v senzor izvrtati 5 mm luknjo

odgovori | To je bilo koristno (7) (Prevedel Google)

Dieter Gibbösch 31-08-2019
Ali je detektor gibanja Steinel iS 140-2 primeren tudi za montažo na strop zunaj (strešni previs)?

odgovori | To je bilo koristno (6) (Prevedel Google)

Van der Bij 11-08-2021
Ne govori z njim

odgovori | To je bilo koristno (0) (Prevedel Google)

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Steinel IS 140-2 Detektor gibanja. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Steinel. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Steinel IS 140-2 Detektor gibanja v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.