Home > Vrt in terasa > Obrezovalniki žive meje > Husqvarna Obrezovalniki žive meje > Husqvarna 522HD60X Obrezovalnik žive meje

Priročnik Husqvarna 522HD60X Obrezovalnik žive meje

Potrebujete priročnik za vaš Husqvarna 522HD60X Obrezovalnik žive meje? Spodaj si lahko brezplačno ogledate in prenesete PDF priročnik v slovenščini. Ta izdelek ima trenutno 4 pogosto zastavljeni vprašanji, 0 komentarjev in ima 0 glasov. Če to ni priročnik, ki ga želite, nas kontaktirajte.

Ali je vaš izdelek okvarjen in v priročniku ne najdete rešitve? Obiščite Repair Café za brezplačno popravilo.

Priročnik

springloaded stop switch and can be started by low

speed and force on the starter handle, even small

children under some circumstances can produce the

force necessary to start the product. This can mean

a risk of serious personal injury. Therefore remove

the spark plug cap when the product is not under

close supervision.

• Store the product out of reach of children.

• Never use the product if you are tired, if you have

drunk alcohol, or if you are taking medication that

could affect your vision, your judgement or your co-

ordination.

• Never use a product that is faulty. Carry out the

checks, maintenance and service instructions

described in this manual. Some maintenance and

service measures must be carried out by trained and

qualified specialists. Refer to instructions under the

heading Maintenance.

• Never use a product that has been modified in any

way from its original specification.

Safety instructions for operation

WARNING: Read the warning instructions

that follow before you use the product.

• Never use the product in extreme weather conditions

such as severe cold, very hot and/or humid climates.

• Faulty blades can increase the risk of accidents.

• Ensure that no-one comes closer than 15 m / 50 ft

while you are working.

• Observe your surroundings and make sure that there

is no risk of people or animals coming into contact

with the cutting equipment.

• Inspect the working area. Remove any objects that

could be thrown out.

• Always ensure you have a safe and stable working

position.

• Never leave the product unsupervised with the motor

running.

• Make sure that your hands and feet do not come

near the cutting unit when the engine is running.

• If anything jams in the blades while you are working,

switch off the engine and wait until it has stopped

completely before cleaning the blades. Disconnect

the HT lead from the spark plug. Refer to

examine the blades on page 12

• When the engine is switched off, keep your hands

and feet away from the cutting unit until it has

stopped completely.

• Watch out for stumps of branches that can be thrown

out during cutting.

• Listen out for warning signals or shouts when you

are wearing hearing protection. Always remove your

hearing protection as soon as the engine stops.

• Never work from a ladder, stool or any other raised

position that is not fully secured.

• Always use both hands to hold the product. Hold the

product in front of your body.

• If any foreign object is hit or if vibrations occur stop

the product immediately. Disconnect the HT lead

from the spark plug. Check that the product is not

damaged. Repair any damage.

• Ensure that the spark plug cap and ignition lead are

undamaged to avoid the risk of electric shock.

• Check that all nuts and screws are tight.

• Make sure the gear housing is lubricated correctly.

Refer to

To lubricate the gear housing on page 12

• The gear housing gets hot when the product has

been in use. To avoid burning yourself do not touch

the gear housing.

• All covers and guards must be fitted before starting.

• The transport guard should always be fitted to the

cutting unit when the product is not in use.

Personal protective equipment

WARNING: Read the warning instructions

that follow before you use the product.

• Always use approved personal protective equipment

when you use the product. Personal protective

equipment cannot fully prevent injury but it

decreases the degree of injury if an accident does

occur. Let your dealer help you select the right

equipment.

• Use approved hearing protection that provides

adequate noise reduction. Long-term exposure to

noise can result in permanent hearing impairment.

• Use approved eye protection. If you use a visor, you

must also use approved protective goggles.

Approved protective goggles must comply with the

ANSI Z87.1 standard in the USAs or EN 166 in EU

countries.

• Use gloves when necessary, for example when you

attach, examine or clean the cutting equipment.

864 - 003 - 19.03.2019

Prenesi priročnik v slovenščini (PDF, 3.4 MB)

(Upoštevajte okolje in natisnite ta priročnik le, če je res potrebno)

Ocena

Povejte nam, kaj menite o Husqvarna 522HD60X Obrezovalnik žive meje, tako da oddate oceno izdelka. Ali želite deliti svoje izkušnje z izdelkom ali postaviti vprašanje? Oddajte komentar na dnu strani.

Ali ste zadovoljni z Husqvarna 522HD60X Obrezovalnik žive meje?
Da Ne

Bodite prvi, ki boste ocenili ta izdelek

0 glasovi

Pridružite se pogovoru o tem izdelku

Tukaj lahko delite svoje mnenje o Husqvarna 522HD60X Obrezovalnik žive meje. Če imate vprašanje, najprej natančno preberite priročnik. Zahtevo za priročnik lahko opravite z uporabo našega kontaktnega obrazca.

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Husqvarna 522HD60X Obrezovalnik žive meje. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Husqvarna. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Husqvarna 522HD60X Obrezovalnik žive meje v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Blagovna znamka	Husqvarna
Model	522HD60X
Kategorija	Obrezovalniki žive meje
Vrsta datoteke	PDF
Velikost datoteke	3.4 MB

Vsi priročniki za Husqvarna Obrezovalniki žive meje
Več priročnikov za Obrezovalniki žive meje

Pogosto zastavljena vprašanja o Husqvarna 522HD60X Obrezovalnik žive meje

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.

Kako naj vem, da je moja živa meja topa? Potrjeno

Ko se veje vlečejo namesto rezanih, je živa meja topa in jo je treba izostriti.

To je bilo koristno (347) Preberi več

Kako nabrusim rezila škarij za živo mejo? Potrjeno

Brušenje rezil škarij za živo mejo je pomembno za ohranjanje zmogljivosti in učinkovitosti orodja. Za ostrenje rezil boste potrebovali pilo ali brusilni kamen, posebej zasnovan za vrsto rezila vaših škarij za živo mejo.

To je bilo koristno (301) Preberi več

Kako namažem rezila škarij za živo mejo? Potrjeno

Mazanje rezil vaših škarij za živo mejo bo pomagalo zmanjšati trenje in obrabo, kar bo podaljšalo življenjsko dobo orodja. Uporabite visokokakovostno mazalno olje, posebej zasnovano za škarje za živo mejo, in po vsaki uporabi nanesite majhno količino na rezila.

To je bilo koristno (147) Preberi več

Kako lahko preprečim nastanek rje na rezilih škarij za živo mejo? Potrjeno

Rja lahko poškoduje rezila vaših škarij za živo mejo, kar zmanjša njihovo zmogljivost in življenjsko dobo. Da preprečite rjo, rezila po vsaki uporabi temeljito očistite in posušite ter jih shranite na suhem in čistem mestu. Razmislite lahko tudi o nanosu zaščitnega premaza, kot je olje ali zaviralec rje, na rezila, preden jih shranite.

To je bilo koristno (90) Preberi več