Home > Vrt in terasa > Obrezovalniki žive meje > Ryobi Obrezovalniki žive meje > Ryobi RY18HT50A Obrezovalnik žive meje

Priročnik Ryobi RY18HT50A Obrezovalnik žive meje

Potrebujete priročnik za vaš Ryobi RY18HT50A Obrezovalnik žive meje? Spodaj si lahko brezplačno ogledate in prenesete PDF priročnik v slovenščini. Ta izdelek ima trenutno 4 pogosto zastavljeni vprašanji, 0 komentarjev in ima 0 glasov. Če to ni priročnik, ki ga želite, nas kontaktirajte.

Ali je vaš izdelek okvarjen in v priročniku ne najdete rešitve? Obiščite Repair Café za brezplačno popravilo.

Priročnik

Safety, performance, and dependability have been given top

priority in the design of your cordless hedge trimmer.

INTENDED USE

The cordless hedge trimmer is intended only for outdoor use

in dry and well-illuminated conditions.

The product is designed for home or domestic use. The

product is intended to cut and trim hedges, shrubs, and

similar vegetation.

Do not use the product for any other purpose.

GENERAL PRODUCT SAFETY WARNINGS

WARNING! Read all safety warnings, instructions,

illustrations and specifications provided with this

power tool. Failure to follow all instructions listed below

may result in electric shock, ﬁ re, and/or serious injury.

Save all warnings and instruction for future reference.

The term “power tool” in the warnings refers to your mains-

operated (corded) product or battery-operated (cordless)

product.

WORK AREA SAFETY

■ Keep work area clean and well lit. Cluttered or dark

areas invite accidents.

■ Do not operate power tools in explosive

atmospheres, such as in the presence of flammable

liquids, gases or dust. Power tools create sparks

which may ignite the dust or fumes.

■ Keep children and bystanders away while operating

a power tool. Distractions can cause you to lose control.

ELECTRICAL SAFETY

■ Power tool plugs must match the outlet. Never

modify the plug in any way. Do not use any adapter

plugs with earthed (grounded) power tools.

Unmodified plugs and matching outlets will reduce risk

of electric shock.

■ Avoid body contact with earthed or grounded

surfaces, such as pipes, radiators, ranges and

refrigerators. There is an increased risk of electric

shock if your body is earthed or grounded.

■ Do not expose power tools to rain or wet conditions.

Water entering a power tool will increase the risk of

electric shock.

■ Do not abuse the cord. Never use the cord for

carrying, pulling or unplugging the power tool. Keep

cord away from heat, oil, sharp edges or moving

parts. Damaged or entangled cords increase the risk of

electric shock.

■ When operating a power tool outdoors, use an

extension cord suitable for outdoor use. Use of a

cord suitable for outdoor use reduces the risk of electric

shock.

■ If operating a power tool in a damp location is

unavoidable, use a residual current device (RCD)

protected supply. Use of an RCD reduces the risk of

electric shock.

PERSONAL SAFETY

■ Stay alert, watch what you are doing and use

common sense when operating a power tool. Do not

use a power tool while you are tired or under the

influence of drugs, alcohol or medication. A moment

of inattention while operating power tools may result in

serious personal injury.

■ Use personal protective equipment. Always wear

eye protection. Protective equipment such as a dust

mask, non-skid safety shoes, hard hat or hearing

protection used for appropriate conditions will reduce

personal injuries.

■ Prevent unintentional starting. Ensure the switch

is in the off-position before connecting to power

source and/or battery pack, picking up or carrying

the tool. Carrying power tools with your finger on the

switch or energising power tools that have the switch on

invites accidents.

■ Remove any adjusting key or wrench before turning

the power tool on. A wrench or a key left attached to

a rotating part of the power tool may result in personal

injury.

■ Do not overreach. Keep proper footing and balance

at all times. This enables better control of the power tool

in unexpected situations.

■ Dress properly. Do not wear loose clothing or

jewellery. Keep your hair and clothing away from

moving parts. Loose clothes, jewellery or long hair can

be caught in moving parts.

■ If devices are provided for the connection of dust

extraction and collection facilities, ensure these are

connected and properly used. Use of dust collection

can reduce dust-related hazards.

■ Do not let familiarity gained from frequent use of

tools allow you to become complacent and ignore

tool safety principles. A careless action can cause

severe injury within a fraction of a second.

POWER TOOL USE AND CARE

■ Do not force the power tool. Use the correct power

tool for your application. The correct power tool will

do the job better and safer at the rate for which it was

designed.

■ Do not use the power tool if the switch does not turn

it on and off. Any power tool that cannot be controlled

with switch is dangerous and must be repaired.

■ Disconnect the plug from the power source and/

or remove the battery pack, if detachable, from

the power tool before making any adjustments,

changing accessories, or storing power tools. Such

preventive safety measures reduce the risk of starting

the power tool accidentally.

■ Store idle power tools out of the reach of children

and do not allow persons unfamiliar with the power

tool or these instructions to operate the power tool.

Power tools are dangerous in the hands of untrained

users.

■ Maintain power tools and accessories. Check for

misalignment or binding of moving parts, breakage

of parts and any other condition that may affect the

power tool’s operation. If damaged, have the power

tool repaired before use. Many accidents are caused

by poorly maintained power tools.

■ Keep cutting tools sharp and clean. Properly

maintained cutting tools with sharp cutting edges are

less likely to bind and are easier to control.

ENGLISH

Original Instructions

Ocena

Povejte nam, kaj menite o Ryobi RY18HT50A Obrezovalnik žive meje, tako da oddate oceno izdelka. Ali želite deliti svoje izkušnje z izdelkom ali postaviti vprašanje? Oddajte komentar na dnu strani.

Ali ste zadovoljni z Ryobi RY18HT50A Obrezovalnik žive meje?
Da Ne

Bodite prvi, ki boste ocenili ta izdelek

0 glasovi

Pridružite se pogovoru o tem izdelku

Tukaj lahko delite svoje mnenje o Ryobi RY18HT50A Obrezovalnik žive meje. Če imate vprašanje, najprej natančno preberite priročnik. Zahtevo za priročnik lahko opravite z uporabo našega kontaktnega obrazca.

Več o tem priročniku

Zavedamo se, da je lepo imeti papirni priročnik za vaš Ryobi RY18HT50A Obrezovalnik žive meje. Priročnik lahko vedno prenesete z naše spletne strani in ga natisnete sami. Če želite imeti originalni priročnik, priporočamo, da kontaktirate Ryobi. Morda bodo lahko zagotovili originalni priročnik. Ali iščete priročnik za vaš Ryobi RY18HT50A Obrezovalnik žive meje v drugem jeziku? Na naši domači strani izberite želeni jezik in poiščite številko modela, da preverite, ali je na voljo.

Specifikacije

Blagovna znamka	Ryobi
Model	RY18HT50A
Kategorija	Obrezovalniki žive meje
Vrsta datoteke	PDF
Velikost datoteke	4.24 MB

Vsi priročniki za Ryobi Obrezovalniki žive meje
Več priročnikov za Obrezovalniki žive meje

Pogosto zastavljena vprašanja o Ryobi RY18HT50A Obrezovalnik žive meje

Naša podporna ekipa išče uporabne informacije o izdelkih in odgovore na pogosta vprašanja. Če v pogosto postavljenih vprašanjih odkrijete nenatančnost, nam to sporočite prek obrazca za stik.

Kako naj vem, da je moja živa meja topa? Potrjeno

Ko se veje vlečejo namesto rezanih, je živa meja topa in jo je treba izostriti.

To je bilo koristno (276) Preberi več

Kako nabrusim rezila škarij za živo mejo? Potrjeno

Brušenje rezil škarij za živo mejo je pomembno za ohranjanje zmogljivosti in učinkovitosti orodja. Za ostrenje rezil boste potrebovali pilo ali brusilni kamen, posebej zasnovan za vrsto rezila vaših škarij za živo mejo.

To je bilo koristno (162) Preberi več

Kako namažem rezila škarij za živo mejo? Potrjeno

Mazanje rezil vaših škarij za živo mejo bo pomagalo zmanjšati trenje in obrabo, kar bo podaljšalo življenjsko dobo orodja. Uporabite visokokakovostno mazalno olje, posebej zasnovano za škarje za živo mejo, in po vsaki uporabi nanesite majhno količino na rezila.

To je bilo koristno (75) Preberi več

Kako lahko preprečim nastanek rje na rezilih škarij za živo mejo? Potrjeno

Rja lahko poškoduje rezila vaših škarij za živo mejo, kar zmanjša njihovo zmogljivost in življenjsko dobo. Da preprečite rjo, rezila po vsaki uporabi temeljito očistite in posušite ter jih shranite na suhem in čistem mestu. Razmislite lahko tudi o nanosu zaščitnega premaza, kot je olje ali zaviralec rje, na rezila, preden jih shranite.

To je bilo koristno (44) Preberi več